20 Truths About Automotive Key Repair: Busted

Automotive Key Repair - What to Do When Your mobile car key repair Key Won't Turn in the Ignition

We've all had this experience - the car key won't turn on the ignition. It can happen at the worst possible moment, like when you're filling your trunk with groceries or driving home from work.

Rather than panic, there are several different solutions to get you back on the road. Here are a few of the most common car key repair issues and possible solutions:

Broken or bent keys

A bent key is the most common reason why a car key fob repair service owner is unable to start their vehicle. This can be fixed by simply straightening the key. It might sound easy however it is crucial to do it carefully. The key is very thin and bending it just one degree can cause it to break.

To do this, you'll need an area with a solid foundation, as well as pliers. Grab the key at one end with the pliers, and bend it until it is straight. It is best to do this on a flat surface or in a vice. You can then place it into the lock to see if it changes.

If not, it may be time to have a new key cut. This will avoid having to call a locksmith and will ensure your key will function.

It's a good idea to keep a spare in your pocket so that you don't have an entry point into your vehicle in the event of a damaged key.

If you're having difficulty inserting a bent or broken lock key, try applying some lubricant to it. This will enable it to move easier through the cylinder and prevent it from getting stuck. It is possible to use a spray lubricant or graphite powder. Use the plastic tube that comes with the spray to get the most precise application. This will also help to prevent moisture from ruining your key.

Stuck pins and springs

A pin (also known as a roll pin or spring) can sometimes become stuck. A pin is a small piece of metal that measures between 5.1 and 7.6 cm (2.5-3.0 in) long and has hollow ends. It is used to connect two components of a machine. In most cases you can take a nut off by pulling it off using your fingers or a wrench.

If you own a brand new car that has an electronic key with a microchip in it, there's a chance the key needs to be programmed to work with your car. This procedure can be easy or difficult depending on the car's manufacturer and model.

Contact us if you require assistance with your car locks or keys! We can repair, replace or program almost every key for your vehicle.

Gear Selector

If your car's gear selection gets stuck in park mode, it's crucial to bring it to an expert mechanic immediately. This is a safety issue and could lead to serious damage to your vehicle if you continue driving. It could also be a sign that the transmission system is experiencing bigger problems that are expensive to fix.

Luckily, most times, this issue can be fixed easily. Most of the time, the cable end that is attached to the lever can snap or become disconnected. This is a straightforward fix and a mechanic should be able to fix it within a few minutes.

In certain instances the gear selector bushing can become damaged or worn out. Rubber covers are positioned around the articulation points of the gear system in order to keep it fluid. These covers function similar to the cartilage in your joints, so they require to be healthy and flexible.

It's not unusual for them to wear out in time, but there are a few things you can do to prolong their life. It is best to avoid the gear selection in extremely cold temperatures. This is because the gear control cables are prone to freezing and cracking. You should also replace your bushings, for instance ones made by First Line, with high-quality ones.

These bushings are an important part of your gear selector, and should not be ignored. If you find that yours is worn out, it's a good idea to go to an auto key fob repair repair shop that specializes in Land Rover repairs. They will help you find the right parts to fix your gear selection apparatus. They can also offer many other services, including maintenance and repair of your transmission.

Dead battery

If you turn on your key in the ignition and you hear nothing except a click, your battery is dead. The majority of batteries last between three and five years, and as they age they undergo an natural process that causes them to end up dying early. The negative plates of your car battery will begin to be covered with sulfate crystals.

A dead battery can cause your vehicle to lose power, which could result in the radio or electric window not working properly. If your car is having issues beginning in cold weather, it is an indication that it is time for a new battery.

It is possible that your problem is not an unresponsive battery but a malfunction in the charging system. This issue can be fixed by having a mechanic examine that the alternator, serpentine belt and battery cables all work properly.

Another common repair for a key in the automotive is a key fob that has stopped working properly. The key fob is a small device that connects to your vehicle's computer and relays signals and commands between the engine and the accessory systems. This system can get confused or cease communicating with your car when it is exposed to harsh temperatures or gets wet.

You can usually reset the lost key fob by following the instructions provided in the owner's guide. Depending on the type of vehicle it will require opening and closing the doors, turning off lights and other electronics on and off or pressing a certain sequence of buttons. If this doesn't solve your fob, it may require professional programming by an expert. Try these easy techniques before buying a new fob.

Ignition socket

Modern car keys are fitted with a transponder that, when inserted into the ignition, transmits a signal. The signal informs an immobilizer if the key is correct for the car to begin. In the 1990s, car remote key fob repair theft became a major issue. The majority of manufacturers have installed this transponder system due to security and insurance reasons.

If you own a newer vehicle, the only way to replace your key may be through the dealership or by contacting the manufacturer directly. Note down the VIN (vehicle ID number) of your car prior to you leave. This number is usually found on the dashboard, in the door jamb or in the owner's manual.

Bring your existing working key to an AutoZone participating store. An associate will make use of a machine that will trace the contours of the blank key to accurately duplicate the original key. They will then cut the new key with an exact cutting machine in-store. If the key you have is a blade type, a key fob, or has a large grey or black head on it, it'll require programming to your specific vehicle before it can be used to start the engine.