See What Ghost Immobiliser Problems Tricks The Celebs Are Utilizing

Protect Your Pride And Joy With The ghost immobiliser price Immobiliser

Guard your precious possessions from theft by using the Ghost immobiliser ghost. This system is discrete and does not require any additional key fobs to operate.

The device utilizes buttons in your vehicle (steering wheel doors, door panels, and the centre console) to create a unique pin code sequence up to 20 presses. This allows your vehicle to start.

Simple PIN code Change Process

Many owners are upgrading their security because of the rise in vehicle theft. There are many kinds of security products that are available for sale including tracking systems, alarms and immobilisers. However, not all of them are equally effective in protecting your car. While a tracking system can assist you in locating your car in the event of theft, it will not stop the crime from occurring in the first in the first place. Immobilisers, on the contrary perform exactly as they state on the label - they shut down the motor of your car so that it can't be started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to steal your car.

Using the existing buttons in your car, the ghost device creates an unique sequence that must be entered before the engine will start. This can be accomplished by using the window, heater or indicator stalk buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their car without having to use the button sequence. This feature is particularly useful when you need to hand your car over for valet parking or servicing, as the immobiliser is activated and not disabled.

The Ghost is an unique and innovative device that works by using the buttons on your vehicle rather than as a standalone unit. It is not only an effective deterrent for vehicle theft and vandalism, but it can be used to secure any future vehicles you may own. This makes it a much better investment than a traditional wheel lock.

Small, weatherproof device

The Autowatch Ghost Immobiliser is a sophisticated security system that protects your car from key hacking and cloning. It also stops ECU swapping. It's a weatherproof, tiny device that communicates directly with your vehicle's ECU via the CAN data bus to shut down the engine. It can be installed in the vehicle without the need for extra wiring, and has been thoroughly tested to ensure it is compatible with all vehicles. It is also indestructible to jamming devices which is the most common method used by car thieves to circumvent existing immobilisers.

The advantage of CAN data over conventional systems is that they operate in a silent manner. It is not able to be detected by sophisticated RF scanning and code-grabbing techniques, nor can it be detected by traditional diagnostic tools. The Autowatch ghost Immobiliser problems does not produce LED indicators and instead uses the buttons inside your vehicle such as steering wheel or centre console panels to create a unique, programmable disarm sequence. You can create a sequence that is up to 20 presses long for added security. The iPhone app permits one, authorized connection using the pairing code unique to the Ghost and the communication between the two is encrypted.

The Ghost also prevents car thieves from adding an additional key or replacing the ECU to bypass the immobiliser and begin the engine. It will only allow the engine to start if the correct PIN code is entered. It is also possible to put it into Valet/Service mode for temporary operation (with set parameters such as 30mph speed limit) so that you can hand your car over to a valet service to be serviced without needing to enter a PIN code.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket immobiliser CANbus. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device detects signals to prevent your car from starting normally until you enter a specific code. The system can be activated and deactivated by using your smartphone's application without the need for additional wires.

The standard factory immobilisers function by using a transponder, which is embedded in the key. It transmits a message to the ECU. The car will start if the correct code is transmitted. If, however, the transponder from another vehicle is used instead, the immobiliser doesn't recognise it. This enables the vehicle to be stolen and started. A South African company that is at the forefront of vehicle safety systems technology created the Ghost immobiliser. It guards you against key cloning or hacking, and even key theft. Only by physically towing your vehicle away could a thief take it away, and they would still not be able to drive the vehicle.

Ghost makes use of buttons in your vehicle, such as the indicator stalk, the steering wheel, and doors, to generate an individual PIN code that must be entered to use your vehicle. This is not required to use additional hardware, such as keys-fobs, and can be as long as 20 presses long. It is also unrecognizable by diagnostic equipment and does transmit radio frequency signals, so thieves cannot make use of sophisticated RF scanners or code-grabbing technologies to detect that the system has been set up.

Contrary to physical anti-theft devices such as wheel locks or clamps, Ghost is concealed within the vehicle, so it cannot be disabled or removed by thieves. It's also harder to remove than a car alarm that requires disarming with the use of a button sequence. This makes it a fantastic addition to a GPS tracking device, which can be used to locate your vehicle after it's been stolen.

Emergency PIN code override

You do not have to look far on social media for stories or videos of vehicles that have been stolen using the most advanced technology tools. This includes key-cloning and hacking tools that allow you to start your car without the original keys.

The ghost vehicle immobiliser immobiliser was designed to combat this, and give you an additional layer of security in order to prevent your vehicle from being targeted by thieves. It is created by creating a unique pin code push sequence from your buttons on the steering wheel, door panel, and the centre console. This unique PIN has to be entered together with your original key fob in order to prevent the vehicle from beginning. The unique override pin can be found on the black card you will receive following your installation. It's easy to remember since there are no LED indicators.

The device is hidden in the vehicle's wiring and does not emit radio signals, therefore it can't be identified by modern thieves using diagnostic software that can recognise what type of security system you have installed. This makes it an excellent alternative to a tracker.

Contrary to other security systems that rely on a relay located in the engine bay, these immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to shut down the vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect an analog immobiliser, alarm, or tracker with these systems, however this must be specified before installing the device. They are also compatible with valet/service modes and a great alternative to a tracker device when you take your car immobiliser ghost into the dealer for an electrical problem.

Service/Valet mode

In recent years there has been a rise in the number of vehicles being stolen without the owners keys. It's now easier than ever before to steal your pride & joy due to the availability of key cloning tools & door lock picks. We have developed the Autowatch Ghost Immobiliser to combat this. It prevents your car from being driven, even if your keys have been copied.

It directly communicates with your vehicle's ECU (Engine Control Unit) via the CAN data circuit. It's completely quiet since it doesn't use radio frequencies or key fobs. This means that it can't be detected by diagnostics or any other car hacking devices. It also prevents the addition of an additional key or replacing the ECU to get around the system since only the correct PIN code can allow the engine to start.

The device is hidden in your car and can be accessed by existing buttons on your steering wheel, centre console, and door panels. Before you can start your car, you need to enter a unique and reversible PIN number that is up to 20 numbers.

This is the very first aftermarket CAN bus immobiliser that has been developed. It will prevent your vehicle from being started or driven when you don't enter a PIN number first. If you're driving away with the device arming it will display an indicator on your dashboard which will flash continuously for about 300m. Entering your PIN code will deactivate the anti-hijack. Your car will continue to function just as normal. If you don't enter your PIN code at this point, the indicator will keep flashing & will require a new PIN code every attempt to start your vehicle.