10 Things That Your Family Teach You About Repair Patio Door Lock
How to Repair a Bad Patio Door Lock
A safe patio door is vital to home security. It can be frustrating when it isn't easy to lock.
In a lot of instances, a locked that is not working is the result of the wrong alignment or just wear and tear. Lubricating the lock or adjusting its position could help restore its function. If these methods of troubleshooting aren't working, you can replace the mortise lock and handle.
Clean and Lubricate
Over time, dust, dirt and grime can make it difficult to open and close a door lock. A regular cleaning and lubrication routine will stop your security device from becoming stiff or stymied, saving you money on Repair Patio door bills and allowing your door to reach its full lifespan.
The first step in the process is to clean your lock the cylinder. To do this, you'll need a spray can of penetrating oil, like WD-40. Spray a small amount oil into the keyhole and then rotate the key to spread the oil. Do not use solvents like household oil or other that can harm your locks. Spray a small amount on the key.
Once your lock cylinder is clean, it's time to lubricate. You can apply a dry lubricant such as graphite powder or sprays of silicone. Graphite powder lasts for a long time and doesn't swell up like liquid lubricants do, which is why it's a great choice to lubricate locks that are sticky. Silicone sprays are water-resistant and can withstand both moist and freezing temperatures, but may require multiple coats to be effective.
You can also apply de-icer spray specifically made for cold weather. It will remove frost and ice off the lock mechanism. This will allow you to unlock your lock, and then relock it more easily.
The environment will determine the frequency at which you should lubricate locks. The location of your door will affect its performance. A location that is near the ocean can expose the door to salty air, which can cause corrosion. It is recommended to regularly lubricate your locks at least twice every year, or more frequently if your area has harsh weather conditions. Lubricating your patio doors repair door locks can help save money on repairs, and ensure that they continue to function properly for a long time.
Reposition the Lock Cylinder
If your patio door lock doesn't perform as it should it could be because one or more of its components could be damaged or misaligned. Regular inspections and prompt repairs of a damaged lock on your patio door will help prevent further damage and guarantee the security of your doors. To fix a locked or non-locked patio door, tighten loose screws, adjust the lock mechanism or replace the lock cylinder.
Start by checking the exterior and the inside of the lock to see if there are any signs of damage or misalignment. Locks for patio doors can expand or contract in response to the weather, and they might even shift with time. This slight movement could cause the locking mechanisms to not align properly and lead to problems with opening or closing the door.
Examine the keyway hole of the lock cylinder. A corroded or blocked cylinder may be difficult to open and can eventually cause damage to the pins, cams, or latch springs. If the cylinder isn't easy to insert, you might be able of removing any obstructions with a pair of tweezers or a picklock. If the issue persists, you may need to take out the cylinder to determine the source.
If the lock cylinder isn't secured to the lock body, you can loosen it by uncrewing a flat screw inside the cylinder faceplate. By loosening this screw, it will allow you to move the cylinder around and could help restore proper alignment.
Check the cylinder for a little tab that can move up and down using the key, generally towards the very end. This tiny clip, also known as a "release Tab", prevents the cylinder from sliding glass patio door repair into the lock body completely. This tab can be moved back by using a standard key. This will allow the cylinder to be removed and then reinserted.
If the cylinder of your lock has become stuck it is possible to restore alignment by rotating the cylinder until the latch bolt is engaged with the strike plate. The knob or handle can then be pulled and withdrawn. After you have restored the proper alignment, put back together the lock and check its functionality. If your patio door lock isn't working properly It is likely that an additional component such as the latch spring or latch must be replaced.
Lock the Screws
Locks for patio door repair company doors can be damaged by frequent usage, extreme temperatures dust, dirt and. These delicate components can be damaged if not properly maintained, leading to your door to stop locking properly. Thankfully, most lock problems can be fixed easily by following a few easy maintenance steps.
Clean the lock mechanism. Use a damp cloth to remove any dirt or dust that may be present. Then, dry the components thoroughly. After cleaning some silicone-based lubricant can help keep the moving parts operating smoothly and effectively. Avoid lubricants with oil bases since they could draw dust and dirt which could cause more issues.
Next, if your patio door is equipped with a foot lock that is secure, make sure the foot lock is aligned with the strike plate. In the majority of cases, this will only require adjustment of the screws that hold the foot lock to the patio door frame. Unlock the screw with a Robertson screwdriver and gently push it upwards or downwards to adjust the foot lock as required. After the adjustment is completed, tighten the screw.
The most common problem when it comes to fixing patio door handles is misalignment of the strike plate and latch. This could be due to normal wear and tear or it could be due to the fact that the latch is positioned higher or lower than it should be.
Then, take off the old handle and locate the bolts or screws that are holding it in place. Make sure you keep track of these since you will require them when installing the new handle. Remove the spindle that was in use and slide the new one in place on the inside of the door. Be sure that it is in alignment with the holes in both the interior and exterior handle. Reinstall the interior and external handles once the spindle is been installed. Make sure they are properly aligned with the bolts or screws to secure them.
After you've made any needed adjustments to your patio door frame repair door, be sure to test it by locking and closing the door. If everything is in alignment, the door should open and close smoothly without any additional force. If you are still having issues you may have to reposition your strike plate or latch or replace the lock cylinder.
Replace the Latch
If your patio door locks do not work, it might be time to replace the latch. The replacement of a lock is a relatively simple home improvement project that most homeowners can complete themselves. Begin by sliding the patio doors all the way out and removing the existing lock on the inside of the door. Review the lock to determine the type of lock that you'll need.
Before installing the new latch remove the screws that hold the strike plate (the part of the lock that's mounted on the outside edge of the door frame) and then adjust it horizontally or vertically to align it with the latch hole in the door jamb. After you've adjusted the latch plate then tighten the screws and screw it into place.
Once all the components of your patio door have been relocated or replaced, reassemble and secure them according to the instructions given by the manufacturer. After you've completed the process, test the latch. Check to see if it fits correctly and that it is able to latch when the door is shut. If it does, your patio door lock has been installed correctly and is now ready to provide the security and privacy you have come to expect.
Patio doors, like other areas of your home, need to be aligned properly to work effectively. Over time, temperature cold, dirt and debris could cause the hinges and the frame of the door to shift. Misaligned hinges, door frames, and locking mechanisms are similar to trying to put a key in the wrong keyhole. It's not working. By following these simple steps, you can solve a problem that might have appeared to be unfixable. You should pat yourself on your back for tackling the job and reclaiming your patio door's closed position! We're betting you'll have no issues opening or closing your patio door once more. Good luck! We are here to help if you need any assistance or have questions.